Linino™ One

Linino™ One


The Linino ™ ONE  is a MIPS board based on the Atheros AR9331 and the ATmega32u4 (datasheet). The Atheros processor supports Linino, a Linux distribution based on OpenWRT. The board has built-in WiFi support,  20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, 2 reset buttons and 1 user button.

Buy

 

The Linino One module is composed by a main board and two add-on modules. The Main board contains the following blocks:

  • – Mips microprocessor Qualcomm Atheros AR9331 + Wifi module
  • – AVR Atmel AtMega32u4 microcontroller
  • – MicroUSB
  • – Reset buttons
  • – Leds
  • – ICSP connector

diagram ONE-1 It is possible to add the module dogRJ45 in order to add the following functionality:

  • – Ethernet RJ45 port

Adding the dogUSB add-on module you’ll add the following functionalities

  • – USB port
  • – SD card

The add-ons are optional and they can be mounted depending on the user needs.

Adding the dogUSB – eMMC add-on module you’ll add the following functionalities:

  • – Built-in 4GB eMMC

ONE Booklet

ONE Schematics

ONE Drawing

ONE Microsoft Windows drivers

dogRJ45
Designed to meet IEEE 802.3 Fast Ethernet switch with auto-crossover, auto-polarity, and auto-negotiation.
10/100 Mbps Fast Ethernet port basic switch feature including port mirroring, broadcast storm support, flow control in full-duplex, and back pressure in half duplex. Operating temperature range: 0°C to +60°C .

dogUSB
A type USB connector. Fully compliant with USB Hub specification version 2.0 and is also backward compatible with USB Hub specification 1.1.
Supports automatic switching between bus-power and self-power modes built-in USB 2.0 transceiver. uSD connector with card reader. Supports multiple sectors transfer optimize performance. Supports port-to-slot and read/write operation.
Operating temperature range: 0°C to +60°C.

dogUSB – eMMC
A type USB connector.
Fully compliant with USB Hub specification version 2.0 and is also backward compatible with USB Hub specification 1.1.
Supports automatic switching between bus-power and self-power modes built-in USB 2.0 transceiver.
Built-in 4GB eMMC.
Supports multiple sectors transfer optimize performance.
Supports port-to-slot and read/write operation.
Operating temperature range: 0°C to +60°C.

If you would like to distribute Linino boards, please email sales@doghunter.org

These files are licensed under a Creative Commons Attribution Share-Alike license, which allows for both personal and commercial derivative works, as long as they credit dog hunter LLC and release their designs under the same license.

Net NEUTRALITY